Table of Contents
Advertisement
W W inding the Bobbin
Patterns
6
8
10
7
9
Winding the bobbin
1.
When the bobbin winder spindle is pushed to the
right, which is the „bobbin winding position", the
symbol appears on the LCD screen.
The symbol will disappear from the LCD screen
when the bobbin winder spindle is pushed to the
left, which is the „sewing position".
2.
Hold the thread tail securely in one hand.
3.
Press the Start/stop button or the foot control.
4.
After the bobbin has wound a few turns stop the
machine and cut the thread near the hole of the
bobbin. Continue winding the bobbin until it is full.
The motor stops automatically when the bobbin is
full. Stop the machine by pressing the Start/Stop
or release the foot control. Push the bobbin winder
spindle to left.
5.
Cut the thread and then remove the bobbin.
NOTE: When the bobbin winder switch is placed on the
right, „bobbin winding position" (the corresponding sym-
bol
appears in the LCD screen), the machine will not
sew and the handwheel will not turn. To start sewing,
push the bobbin winder switch to the left „sewing posi-
tion" (symbol disappears).
17
Advertisement
Table of Contents
