Table of Contents
Advertisement
Sewing
1
2
3
4
24
Starting sewing
Start / Stop button
1.
The Start/Stop button can be used to run the
machine when the foot controller is unplugged from
the machine. Press the button to start sewing, then
press it again to stop sewing. The machine will run
slowly at the start of sewing.
2.
The speed limiting adjustment lever can control the
sewing speed.
To increase the sewing speed, slide the lever to the
right. To decrease the sewing speed, slide the lever
to the left.
Foot control
3.
With the sewing machine turned off, insert the
foot control plug into its connector on the sewing
machine.
4.
Turn on the sewing machine, and then slowly de-
press the foot control to start sewing. Release the
foot control to stop the sewing machine.
NOTE: The setting of the speed limiting adjustment lever
will limit the maximum speed of the machine also when
you use the machine with the foot control.
ATTENTION: Consult a qualified electrician if in
doubt as how to connect the machine to the
power source. Unplug the power cord when the
machine is not in use.
Only use this sewing machine with the foot
control C-9000.
Advertisement
Table of Contents
