Bar Tack Stitch - VERITAS Bessie Instruction Manual

Patterns

Bar Tack Stitch

W
B-27
25
D
Patterns
2mm
➊
2mm
➍
2mm
2mm
➌
➋
➎
Bar tack stitch
Select pattern to get the bar tack stitch. Change the
➊
presser foot to the buttonhole foot.
Pull the button holder to the rear. Set the 2 button
➋
guide plate on the buttonhole foot to the desired
length.
Position the fabric so that the needle is 2 mm (1/16")
➌
in front of where you want the sewing to start, and
A
then lower the presser foot.
A Starting point
Pass the upper thread down through the hole in the
➍
presser foot. Pull down the buttonhole lever. The
buttonhole lever is positioned behind the bracket on
the buttonhole foot. Gently hold the end of the upper
thread in your left hand, and then start sewing.
Bar tack stitches are sewn.
➎
As an example, the illustration shows the procedure for
➏
sewing bar tacks at pocket corners.
➏
51