Overcasting Foot - VERITAS Bessie Instruction Manual

Overcasting Stitches
05 08
E
E
1
06 09
B-10
T
T
3
44
2
4

Overcasting foot

1. Change the presser foot to the overcasting foot.
2. Sew the fabric with the fabric edge against the guide
of the overcasting foot.
ATTENTION: The overcasting foot should be
used to sew with Direct Patterns 05 and 08
only. Do not set the stitch width narrower than
"5.0", as it is possible that the needle could hit
the presser foot and break when sewing other
patterns and width settings.
All purpose foot
3.
Change the presser foot to the all purpose foot.
4. Sewing the overcasting along the edge of the fabric
so that the needle drops over the edge of the fabric
on the right side.