Table of Contents
Advertisement
Details of User Operation Change (Version 5.00)
Refer to these sections for details on changes to user operations.
g g Related Links
• "Stacking & Blending Using the Epson Projector Professional Tool
Software"
p.15
• "Curved Surface Correction Using the Epson Projector Professional Tool
Software"
p.15
Stacking & Blending Using the Epson Projector
Professional Tool Software
Stacking & Blending has been added to the projected image composition
method using the Epson Projector Professional Tool software. You can use
the Geometry Assist - Stacking & Blending Function wizard to easily and
quickly create a single large, bright, projected image by joining and
overlapping the images of multiple projectors.
See Epson Professional Projector Tool Operation Guide for more details.
a
Start the Epson Projector Professional Tool software.
b
Create a group of projectors that support Stacking & Blending on the
Layout/Monitoring tab.
c
Select Blending and Stacking Settings on the Create Group screen.
d
Specify the projectors' positions in the Blending and Stacking Settings.
e
Start the Geometry Assist - Stacking & Blending Function wizard.
When the wizard has finished, perform the following operations as
necessary:
• Screen Matching to correct the tint and brightness of each projected
image.
• Point Correction to adjust the gaps in the positions of the projected
image.
Curved Surface Correction Using the Epson Projector
Professional Tool Software
When compositing projected images using the camera assist feature in the
Epson Projector Professional Tool software, curved surfaces are now
supported in addition to flat surfaces.
Previous Image Composition (Version 4.10)
When compositing projected images using the camera assist feature in the
Epson Projector Professional Tool software, only flat surfaces are supported.
New Image Composition (Version 5.00)
When compositing projected images using the camera assist feature in the
Epson Projector Professional Tool software, the following functions now
support curved surfaces.
• Screen Matching (convex surfaces are not supported)
• Color Calibration
• Blending
• Stacking
• Stacking & Blending
See Epson Professional Projector Tool Operation Guide for more details.
Check the following points when using the camera assist feature to
a
correct images projected onto a curved surface.
• All projectors in the group must support the Curved Surface
Correction feature.
• Before using this software to automatically adjust the projected
image, determine the position of linearity for the entire screen, and
attach stickers or other markers to the screen to mark the linearity
adjustment.
• Attach the stickers for linearity adjustment at equally spaced gaps on
the projection surface.
• When correcting the shape using the Geometry Assist wizard, align
the number and position of the correction points with the stickers for
linearity adjustment.
15
Advertisement
Table of Contents
