Using Basic Projector Features
• "Light Source Calibration"
p.64
Panel Alignment
You can adjust the pixel color shift for the LCD panel. You can adjust the
pixels horizontally and vertically in 0.125 pixels increments within a range of
±3 pixels.
Execution Method
Extended > Display > Panel Alignment
s
Color Uniformity
If the color tone of the image is uneven, you can adjust the color tone balance.
Execution Method
Extended > Display > Color Uniformity
s
Refresh Mode
The refresh mode process clears any projected afterimage and turns off the
projector after a specified period of time.
Execution Method
Reset > Refresh Mode
s
Light Source Calibration
The light source calibration process optimizes the color balance of the
currently projected image.
Execution Method
Reset > Light Source Calibration
s
Managing the Projector's Settings
This section provides information about managing the projector's settings.
g g Related Links
• "Memory"
p.64
• "Schedule Settings"
p.64
• "Button Lock"
p.65
• "Lens Lock"
p.66
• "Password Protection"
p.66
Memory
You can save customized settings and then select the saved settings whenever
you want to use them.
Execution Method
• Press the [Memory] button on the remote control.
• Change the projector's menu:
Settings > Memory
s
Schedule Settings
You can schedule up to 30 events to occur automatically on your projector,
such as turning the projector on or off or switching the input source. The
projector performs the selected events on the specified date and time in the
schedule you set up.
Execution Method
64