Projector Parts - Base - Epson EB-810E User Manual

Projector Parts and Functions
Name Function
Security cable Pass a commercially available wire lock through here
K
attachment point and lock it in place.
Remove the cover when using the security cable
attachment point.
You can attach the security cable attachment point
cover to the back of the side cover so that it does not
get lost.
g g Related Links
• "Air Filter and Vent Maintenance"
• "Projector Parts - Control Panel"
• "Remote Control Operation" p.39
• "Cleaning the Obstacle Sensor"
• "Cleaning the Projection Window"
• "Focusing the Image Using the Focus Lever"
• "Installing a Security Cable" p.128
• "Attaching and Removing the Side Cover"

Projector Parts - Base

p.219
p.18
p.217
p.216
p.56
p.37
Name Function
Front adjustable feet When the projector is setup on a surface such as a desk,
turn the feet to correct image distortion.
Remove all feet when you install the projector
on a wall or suspend it from a ceiling.
Air intake vent (air Takes in air to cool the projector internally.
B
filter)
Wire clamp fixing When you use the optional setting plate or ceiling
C
point mount, fix the carabiner here to attach the safety wire
and prevent the projector from falling from the wall or
ceiling.
This point is marked with a
Air exhaust vent Exhaust vent for air used to cool the projector
D
internally.
While projecting, do not put your face or
hands near the air exhaust vent, and do not
place objects that may become warped or
damaged by heat near the vent. Hot air from
the air exhaust vent could cause burns,
warping, or accidents to occur.
Fixing points (four Use these points to attach the optional mount when
E
points) installing the projector on a wall or suspending the
projector from a ceiling.
This point is marked with a
Air intake vent Takes in air to cool the projector internally.
F
Caution
on the projector.
Caution
on the projector.
16