Selecting Wireless Network Settings On Mac; Setting Up Wireless Network Security - Epson EX11000 Service Manual

Selecting Wireless Network Settings on Mac

Before connecting to the projector, select the correct wireless network on your Mac.
1. Click the AirPort or Wi-Fi icon on the menu bar at the top of the screen.
2. Make sure AirPort or Wi-Fi is turned on, then do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the projector's SSID.
• If your projector is configured for a direct wireless connection (Simple AP mode), select the
projector's SSID.
Parent topic:

Setting Up Wireless Network Security

You can set up security for your projector to use on a wireless network. Set up one of the following
security options to match the settings used on your network:
• WPA2-PSK (Simple AP mode only)
• WPA3-PSK
• WPA2/WPA3-PSK
• WPA3-EAP
• WPA2/WPA3-EAP
Note: To set up WPA3-EAP or WPA2/WPA3-EAP security, register your digital certificate file and place
it on a USB storage device for connection to your projector.
1. Press the Menu button.
Wireless Network Projection
61