Installing The Outdoor Unit; Figure 2-12: Holes/Grooves/Screw Holes - Alvarion BreezeACCESS LB System Manual

The Vertical mount bracket for the antenna can accommodate 1 ¾" to 4
½ OD masts.

Installing the Outdoor Unit

The following sections describe how to install the Outdoor Unit,
including pole mounting the unit, grounding and IF cables.
The Outdoor Unit can be mounted on a pole using one of the following
options:
Special brackets and open-ended screws are supplied with each
unit. There are two pairs of screw holes on the back of the unit,
enabling the special brackets to be mounted on diverse pole widths.
U-bolts – Size "A" fit the inner installation holes for poles of up to 2
inches.
U-bolts – Size B fit the outer installation holes for poles up to 3
inches.
Special grooves on the sides of the unit enable the use of metal
bands to secure the unit to a pole. The bands must be 9/16 inches
wide and at least 12 inches long. The metal bands are not included
with the installation package.
Figure 2-12 shows the locations of the U-bolt holes, band grooves and
screw holes on the back, top and bottom of the Outdoor Unit.
NOTE
Be sure to install the unit with the bottom panel, which includes the IF connector, facing
downward.

Figure 2-12: Holes/Grooves/Screw Holes

Installing the Antenna and Outdoor Unit
2-13