Table of Contents
Advertisement
Chapter 3 - Commissioning
Ethernet MAC Address: Specifies the Ethernet MAC address used by
the local LB NI-01 Indoor unit.
IP Address: Specifies the IP address used by the local LB NI-01 Indoor
unit.
Subnet Mask: Specifies the IP Subnet Mask used by the local LB NI-01
Indoor unit.
Default Gateway: Specifies the IP address of the default router /
gateway on the local Ethernet segment.
RF Link Established: "Yes" indicates the RF link with the remote LB
NI-01 Indoor unit is established. "No" indicates there is no RF link to
the remote LB NI-01 Indoor unit. This indicator is correlated to the
Wireless Link LED.
Uncoded Burst Rate [Mb/s]: The actual current Uncoded Burst rate for
the link. Obtaining a 64 QAM license key (see page 3-24) raises the
available Modulated Burst Rate from the default 36 Mbps to 54 Mbps
BreezeACCESS LB System Manual
3-16
Advertisement
Table of Contents
Troubleshooting
