Alvarion BreezeACCESS LB System Manual page 71

Table 3-5: Log Messages and Descriptions
Log Message
203-Another upgrade in
progress!
204-Invalid upgrade
parameters!
205-Upgrade failed!
206-Password changed
unsuccessfully!
207-Timeout on reading data
packet!
209-TFTP error received!
210-Error: TFTP unknown
message!
211-Error: while writing flash!
212-Error firmware
configuration!
213-Firmware programming
failed!
214-Error while loading version
control!
215-Log buffer full!
216-Invalid Options Key!
Description
The system is already in upgrade mode, in the
event the operator inadvertently invoked
multiple simultaneous upgrades.
The parameter entered is in error. If this
message appears, check for typing errors.
The software upgrade process completed
unsuccessfully.
The new password entered into the system
was not successful. In this case, repeat the
process.
The system has timeout looking for packets
from the host computer or server. Check for
obvious problems such as disconnected or
faulty cable.
TFTP Protocol used to download the software
to the LB NI-01 indoor unit during the
Upgrade process failed. Likely cause is
disconnected or faulty cable.
The TFTP client received an unknown
message. In this case, repeat the upgrade
process.
While writing the new software into LB NI-01
indoor unit flash memory an unexpected error
occurred. Try to repeat the process and if the
error persist contact technical support
An unexpected error occurred while writing
the onboard firmware configuration. Try to
repeat the process.
The firmware programming failed.
Software version control data was not loaded
successfully.
The log buffer overflowed.
User entered an invalid Product Options key.
System Logs
3-27