System Status And Configuration; System Status - Alvarion BreezeACCESS LB System Manual

System Status and Configuration

System Status

Command
cableattn
erxpkt
erxpktd
etxpkt
gateway
ipaddr
ipmask
macaddr
master
resetstats
rffreq
rflink
rfstatus
rssimax
rssimean
rssimin
sinadr
Table C-3: System Status
Description
The attenuation of the signal over the IF cable
Counts the number of packets successfully
received locally
Counts the number of packet errors received
locally
Counts the number of Ethernet packets
transmitted
Specifies the IP address of the default router
Specifies the IP address used by the local
terminal
Specifies the IP Subnet Mask used by the local
terminal
Specifies the Ethernet MAC address used locally
Indicates whether the system is serving as
master or slave
Resets all statistics
The center frequency of the channel in use
Yes: RF link up. No: RF link down
An error code (0-31), indicating the RF status
The maximum received signal strength
The average received signal strength
The minimum received signal strength
The no. of successful wireless pkt. received over
the air
System Status and Configuration
C-5