Installing The Su-I Subscriber Unit - Alvarion BreezeACCESS 900 System Manual

Installing the SU-I Subscriber Unit

Installation Requirements
This section describes all the supplies required to install the SU-I
Subscriber Units and the items included in each installation package.
Packing List for SU-I-1D-A6/A10-900 Subscriber Unit
The SU-I installation kit includes the following components:
SU-I-1D Subscriber Unit with a wall mounting kit
5 VDC universal power adaptor
Mounting bracket for wall or ceiling installation
A torque key for the antenna connector
Antenna:
SU-I-1D-A10: Outdoor antenna, including a pole
mounting hardware and an antenna cable kit
(10ft and 20ft cables [LMR-240] and a DC
grounding block)
Or
SU-I-1D-A6: Indoor antenna with a 10 ft. cable,
including wall/window mounting hardware
Additional Installation Requirements
The following items are also required to install the Subscriber Unit:
Grounding cables and other lightning protection materials according
to specific installation requirements
Straight Ethernet cable for connecting the Subscriber Unit to a PC
For configuring basic parameters - A portable PC, with Ethernet NIC
and Telnet software (or BreezeCONFIG ACCESS Configuration
Utility)
OR
A portable PC with Terminal Emulation software and a Monitor
cable
Installation tools and materials, including appropriate means (e.g. a
pole) for installing the outdoor antenna. A Wall/Roof Mounting Arm
(P/N 872442 is available from Alvarion.
Manual Revision 1.0
Installing the SU-I Subscriber Unit
2-21