System Configuration And Operation Via Telnet; Figure 3-2: User Name And Password Dialog Box - Alvarion BreezeACCESS LB System Manual

Alvarion breezeaccess breezeaccess lb wireless bridge: user guide
Hide thumbs Also See for BreezeACCESS LB:
Table of Contents

Advertisement

Chapter 3 - Commissioning

Figure 3-2: User name and Password Dialog Box

The main menu on the left includes the following links:
General Information
System Status
Configuration
Upgrade
Change Password
Registration
Log File
The General Information page does not accept input from the user. Data
shown on this page may be modified via the Configuration page.

System Configuration and Operation via Telnet

All operator communications with the LB NI-01 indoor unit may be
made using Telnet. This offers the advantage of allowing the operator to
access and control the LB NI-01 indoor unit remotely from any
geographical location, without the need for a web browser. This section
describes the procedures for configuring and operating the LB NI-01
indoor unit via Telnet using the command line interface (CLI).
To connect to the indoor unit, Telnet to the IP address of the indoor unit
(default address shown below).
3-4
BreezeACCESS LB System Manual

Advertisement

Table of Contents
loading

Table of Contents