Alvarion BreezeACCESS LB System Manual page 42

Chapter 2 - Installation
2. Connect the F-type male cable connector to the female connector on
the outdoor unit. The connector should then be weatherproofed with
a standard weatherproofing material for outdoor RF installations.
3. The provided IF cable is for exterior use. It is recommended that the
cable terminate at the exterior wall using a grounding block, and
that interior grade cable be used to connect the LB NI-01 Indoor
unit to the grounding block according to local codes. Additional
lightning protection can be used to enhance the protection of the
indoor unit, and outdoor unit from sudden electrical surges.
Suitable lightning arrestors can be purchased through any of
Alvarion's system integrators.
4. Connect the IF cable to the F-type female connector located on the
back of the LB NI-01 Indoor unit. The connector should be
tightened finger-tight and then tightened an additional 1/8 of a turn
2-16
BreezeACCESS LB System Manual