Table of Contents
Advertisement
BreezeACCESS SU-M Installation Guide
2-2
Packing List
SU-M units are shipped with the following units and accessories.
The exact packing list varies depending on system configuration and
ordered equipment.
! The SU-M unit
! An omni antenna with mounting kit and cable
! A 12 VDC power cable with fuse
! Mounting hardware for the SU-M unit
Other Items Required for
Installation
! A PC in the vehicle with Ethernet capability
! Installation tools and materials
Installing the SU-M Unit
The SU-M unit must be installed securely in the vehicle. Four screws
are provided to mount the SU-M to either wood or sheet metal.
The position of the SU-M unit must allow it to be easily connected to
the PC, the omni antenna and the power supply. See the connection
diagram for guidance concerning relative placement and how best to
connect the units.
Install the SU-M as follows:
1
2
3
4
Place the unit against the surface where you wish to mount it.
Mark the screw placement using four of the mounting holes in the
unit as guides.
Drill four holes in the surface using the marks you made.
Clear all paint, dirt and oil away from the immediate area around
the holes.
Screw the unit firmly in place using the mounting kit provided.
Advertisement
Table of Contents
