Chapter 5 - Wireless Broadband
Adjacent Area Deployments
During the installation process, it is important to ensure there is no
potential for interference from other systems deployed in adjacent areas.
Figure 5-9 presents a simple deployment configuration to illustrate the
potential interference that may arise from adjacent area sources (Users
1 to 4 in Figure 5-9).
The desired communication link is between Terminal 1 and 2. The link
between Users 1 and 2 must operate in an adjacent channel to avoid
interference with the desired link. Users 3 and 4, on the other hand,
can operate co-channel since they are outside the narrow beam width of
both LB NI-01 Indoor units. Narrow beam widths are one feature of the
BreezeACCESS LB to help address potential interference.
Figure 5-9: Deployment Scenarios
5-16
BreezeACCESS LB System Manual