Preparation Before Assembly - Siemens VersiCharge Operating Instructions Manual

Mounting / Installing / Connecting

4.2 Preparation before assembly

4.2 Preparation before assembly
Requirements
• Follow country-specific statutory installation requirements.
• Installation site:
– The wall is even and load-bearing
– When mounting on a column or anywhere else, observe the applicable notes on
• The power supply connection is available.
• All power supply connections are de-energized and secured against unintentional
reconnection.
Required tools
The required tools are not included in the scope of delivery.
• SW 36 open-ended wrench
• Optional cable gland
• Phillips head screwdriver set
• Slotted screwdriver set
• Torx TR screwdriver set
• Tool set for electricians
• Spirit level
• If applicable, Crimp and mounting tool for RJ45 plug
Tools for stone wall or concrete wall:
• Impact drill
• Masonry drill ∅ 8 mm
• Hammer
24
installation and mounting information
VersiCharge AC Wallbox IEC
Operating Instructions, 03/2021, A5E50366109-AA