Siemens VersiCharge AC Quick Start Installation Manual
Electric vehicle charging station
Hide thumbs
Also See for VersiCharge AC:
- Installation and operation manual (52 pages) ,
- User manual (39 pages) ,
- Quick start installation manual (24 pages)
Related Manuals for Siemens VersiCharge AC
Summary of Contents for Siemens VersiCharge AC
- Page 1 QUICK START INSTALLATION GUIDE VersiCharge ™ Electric vehicle charging station March 2023 VersiCharge™ Blue VersiCharge™ AC Buy American Compliant (with 25-foot cable)
-
Page 2: Installation Kit
VersiCharge™ AC Electric vehicle charging station Installation Kit Equipment List Standard Installation – What you will need: Certified electrician (recommended) Cordless drill (Phillips bit with extender) Stud finder Level – include 1/8” drill bit for pilot holes 240 V AC voltmeter NEMA 6-50 outlet (only used for the 7/16”... - Page 3 Admin Card User Card User Card NOTE: Supplied with Commercial units only. For RFID setup, see RFID Setup in the complete VersiCharge Installation and Operations Manual at: usa.siemens.com/versicharge. 1 – Mounting bracket 1 – Cable holster 2 – Admin Cards 5 –...
- Page 4 VersiCharge™ AC Electric vehicle charging station Hardwire Bending Diagram VersiCharge Hardwired Models Dedicated 2-pole 50 A / 60 A common trip branch circuit breaker NOTE: The rating of the circuit breaker that will be required is based on the ampere rating of the EVSE; 40 A requires a 50 A breaker, and 48 A requires a 60 A breaker.
- Page 5 Mount in compliance with all National Electrical Code® (NEC) and local jurisdiction requirements. For Siemens post-installation, see the post instruction manual at usa.siemens.com/versichargecommercial , under the Installation section. Step 1 B: Alternate mounting – wallboard installation NOTE: Anchor rating: five anchors must be rated as 61 lbs anchors rated for 1/2”...
- Page 6 VersiCharge™ AC Electric vehicle charging station Step 4: Hardwire the VersiCharge and ferrite core – VersiCharge will need to be mounted on the bracket to hardwire the device. skip if using an existing 240 V outlet Plug-supplied units only: Open the VersiCharge to expose the backside of the unit. Remove the high voltage door by removing the four screws.
- Page 7 ON). NOTE: For more detail on the Modbus and the Termination Switch position settings, refer to the complete VersiCharge AC Series Installation and Operations Manual and the VersiCharge Modbus Manual at www.usa.siemens.com/versichargecommercial...
- Page 8 VersiCharge™ AC Electric vehicle charging station Step 9: Connect the external remote control interface The Siemens VersiCharge has a remote control interface that allows charging to be controlled by an external device. Examples include demand response switches, using the multi-use connector – supplied with building automation systems, digital sensors, and so on.
- Page 9 If assistance is needed, please call 1 855-950-6339, option 9, or create a support ticket at https://siemens-smartinfrastructure.force.com/SI/s/createcase. Please visit usa.siemens.com/versichargeinstall for additional instruction and information or scan the QR code below to learn how to easily install your VersiCharge AC level 2 EV charger.
- Page 10 This document contains a general description of available technical options only and its effectiveness will be subject to specific variables, Siemens Industry, Inc. including field conditions and project parameters. Siemens does not 3617 Parkway Ln. make representations, warranties, or assurances as to the accuracy or Peachtree Corners, GA 30092 completeness of the content contained herein.