Installation And Maintenance Schedule - Siemens VersiCharge Operating Instructions Manual

A.3

Installation and maintenance schedule

Introduction
Depending on the area of application, perform the general cleaning work and maintenance
work every 6 months. Shorten this interval according in the event of difficult usage
conditions.
Follow the regionally valid regulations on servicing and maintaining this type of electrical
charging equipment.
Cleaning
Remove dirt/dust/residue from the device and the usage area. Wipe the surfaces with a damp
cloth. For stubborn stains, use a cleaning agent containing alcohol. Do not clean the device
with a pressure washer. Do not use aggressive cleaning agents.
Check
Check the device for the following:
• Cuts, damage and soiling
• Defects and rust
• Clearly visible signs of faded colors
• Residue or damage on the cables, cable holders and plugs
• Signs of rust on the plug pins
• Accumulation of snow around the VersiCharge
Contact the supplier if you notice any anomalies.
Avoid accumulation of snow around the VersiCharge. Clear the area accordingly. In heavy
snowfall, clear the area daily.
VersiCharge AC Wallbox IEC
Operating Instructions, 03/2021, A5E50366109-AA
A.3 Installation and maintenance schedule
Appendix
67