Assembly Procedure - Siemens VersiCharge Operating Instructions Manual

4.3

Assembly procedure

Specific safety measures
Risk of electric shock when moist due to condensed water
Before commissioning the charging station, an authorized and qualified electrician must
check whether there is moisture in the charging station. Remove even small amounts of
condensed water before commissioning. Take appropriate measures for drying.
Do not switch off the power supply for an extended period of time after commissioning.
This will prevent condensation in the charging station. If the charging station is to be
switched off for a longer period of time, you need to provide suitable moisture protection.
Risk of accident
Risk of accident when the charging station is not secured.
• Do not leave the charging station unattended.
• Place or lay down the charging station and its parts in such a way that the charging
Risk of accident
Risk of accident in limited space. Leave sufficient clearance to surrounding obstacles to
avoid collisions and crushing when setting up the charging station.
• Ensure that there is sufficient clearance to the surrounding obstacles when setting the
• Keep the working area free of objects to avoid the risk of tripping.
VersiCharge AC Wallbox IEC
Operating Instructions, 03/2021, A5E50366109-AA
DANGER
WARNING
station and its parts cannot tip over or fall down.
WARNING
load down.
Mounting / Installing / Connecting
4.3 Assembly procedure
25