Siemens VersiCharge Quick Start Manual

Sample Tools Used
Certified Electrician Cordless Drill
(Recommended) (Phillips Bit)
2 pole, 40 amp #8 copper wire,
circuit breaker 3 conductors
Refer to your USB key chain before installation to:
• Review the complete Installation and Operations Manual
• Learn how to use the amperage adjustment dial or
participate in utility programs using the VersiCharge remote
control interface
• Find additional information on how to future proof your
home's energy consumption
240 V AC
Voltmeter
Siemens Industry, Inc.
5400 Triangle Parkway
Norcross, GA 30092
NEMA 6-50 Outlet
1-800-241-4453
(if not hardwiring)
info.us@siemens.com
Order No. RPBR-VERQS-0814 | Printed in USA |
All rights reserved.
© 2014, Siemens Industry, Inc.
The information provided in this brochure contains merely
general descriptions or characteristics of performance which
in case of actual use do not always apply as described or
which may change as a result of further development of the
products. An obligation to provide the respective
characteristics shall only exist if expressly agreed in the
terms of contract.
www.usa.siemens.com/versicharge
Powering
your drive
into the
future!
All product designations may be trademarks or product
names of Siemens AG or supplier companies whose use by
third parties for their own purposes could violate the rights
of the owners.
NEC® is a registered trademark of the National Fire
Protection Association.
Siemens VersiCharge
Quick Start Guide
Electric Vehicle Charging Station
www.usa.siemens.com/versicharge
™