6.5
Changing Data on the Online Device
Always execute changes in the project tree of the selected device and load the changes to the device. Proceed
as follows:
In your project, click the node of the selected device.
²
Execute the desired changes, for example, in the settings.
²
Select the device again and right-click the device.
²
In the menu, select the item Load configuration to device.
²
DIGSI transfers the changed configuration data to the device. After a successful transfer, the device restarts.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
Using DIGSI 5
6.5 Changing Data on the Online Device
105