Siemens SIPROTEC 5 Manual page 147

how many indications have just been selected or shown. The end of the indication list is closed with the entry
***END***.
[scoprlog-090413-01.tif, 1, en_US]
Figure 8-6
Menu Path
Main menu → Indications →
Main Menu → Test & Diagnosis → Log →
To reach the desired log from the main menu, use the navigation keys of the on-site operation panel.
Navigate inside the log using the navigation keys (top/bottom). You will find the most current indication
²
at the top of the list. The selected indication is shown with a dark background.
Which indications can be shown in the selected log depends on the assignments in the DIGSI 5 information
routing matrix or is predefined. Every indication contains date, time and its state as additional information.
You will find information about this in chapter
In some logs you are given the option of deleting the entire indication list by softkey in the footer of the
display. To learn more about this, read chapter
NOTE
i
i
No password entry is necessary to read indications from the device.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
On-Site Display of an Indication List (Example: Operational Indications)
Log
Operational log
Fault log
Ground-fault log
Setting changes
User indications 1
User indications 2
Motor-starting indications
Communication-supervision log
Device diagnosis
Security indications
Communication indications
8.5.1 General.
8.5.12 Saving and Deleting the
Operation in the Operating State
8.4 Indications
Logs.
147