Siemens SIPROTEC 5 Manual page 163

Reading from the PC with DIGSI 5
•
To reach the ground-fault log of your SIPROTEC 5 device, use the project-tree window.
Project → Device → Process data → Logs → Ground-fault log
The status of the device-diagnosis log last loaded from the ground-fault log is shown to you.
•
To update (synchronization with the device) click the button Read log entries in the headline of the indi-
cation list (Figure 8-18
[scgrflmd-191012-01, 1, en_US]
Figure 8-18
Reading on the Device through the On-Site Operation Panel
•
To reach the ground-fault log from the main menu, use the navigation keys of the on-site operation
panel.
Main menu → Indications → Ground-fault indication
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
[scgfllg1-191012-01.tif, 1, en_US]
Figure 8-19
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
a)).
Reading the Ground-Fault Log with DIGSI 5
Reading the Ground-Fault Log on the On-Site Operation Panel of the Device
Operation in the Operating State
8.5 Logs
163