Siemens SIPROTEC 5 Manual page 182

Operation in the Operating State
8.6 Edit Measured and Metered Values
Enter the desired value in the Current value column. The input value is converted to the data format
²
according to IEC 61850. In addition, the input value is rounded to 6 digits. The display is limited to 6
digits. Therefore please note that, in case of small pulse weighting, minor changes to large metered
values can not be reflected in the display.
To transfer the value to the device, click the Set button.
²
[scubstwe-080413-01.tif, 1, en_US]
Figure 8-38
182
Overview of Statistical Values
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020