Error Messages - Hartmann Veroval BPM25 Instructions For Use Manual

English
GB

8. Error messages

Error which has Possible causes
occurred
Monitor cannot be Batteries are missing, inserted incorrectly or flat.
switched on
The measuring signals were not read or were read
incorrectly. This can be caused by the cuff not
being applied correctly, moving, talking or a very
weak pulse.
E2
Invalid measurement due to movement.
E3
The cuff was not applied correctly.
E4
Error during the measurement.
E5
Inflation pressure is higher than 300 mmHg.
E6
There is a system error.
758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 78 758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 78
Remedy
Check batteries and insert two identical new batter-
ies if necessary.
Check that the cuff has been positioned correctly.
Do not talk or move during the measuring proce-
dure. Also observe the 10 golden rules.
Do not talk or move during the measuring proce-
dure.
Check that the cuff has been positioned correctly.
Contact customer service if this error message
appears.
Please rest for at least 1 minute and take the meas-
urement again.
Contact customer service if this error message
appears.
78
26.03.20 08:33 26.03.20 08:33