Transferring Measured Values To Veroval ® Medi.connect - Hartmann Veroval BPM25 Instructions For Use Manual

English
GB
If an irregular heartbeat was detected during measurement,
that information is also stored and displayed when the
measured value is retrieved from the monitor's memory
along with the systolic and diastolic blood pressure read-
ings, pulse rate, time, date and year.
You can cancel the memory recall at any time by pressing
the START/STOP button
switch off automatically after a few seconds.
Even if the power supply is interrupted, e.g. when changing
the batteries, the stored values will still be available.
758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 76 758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 76
. Otherwise, the monitor will
Deleting saved readings
All data saved for each user can be separately deleted for user
memory and user memory
the corresponding user memory (
will then appear on the display.
Press and hold the user memory button for
5 seconds. 'CL 00' appears on the display.
All data in the selected user memory are
now deleted. If you release the button
ahead of time, no data will be deleted.
7. Transferring measured values to
Veroval medi.connect
®
Download the Veroval ® medi.connect software from the
website www.veroval.info. Compatible with any computer
with Windows 7, 8 or 10 (for the duration of official Microsoft
support).
Start the program and connect the Veroval
your PC using the enclosed USB cable. Then follow the instruc-
tions in the Veroval ® medi.connect software.
No data can be transferred during a measurement.
76
. To do so, press the button of
or ). The average value
wrist monitor to
®
26.03.20 08:33 26.03.20 08:33