Panel Mounting; Figure 3-18: Secure The Panel Pc; Figure 3-19: Afl-W10A-Bt Cutout Dimensions - IEI Technology AFL3-W10A User Manual

Figure 3-18: Secure the Panel PC

3.12.2 Panel Mounting

To mount the AFL3-W10A/12A/W15A-BT flat bezel panel PC into a panel, please follow
the steps below.
Step 1: Select the position on the panel to mount the panel PC.
Step 2: Cut out a section corresponding to the size shown below. The size must be
smaller then the outer edge.

Figure 3-19: AFL-W10A-BT Cutout Dimensions

Page 36
AFL3-W10A/12A/W15A-BT Panel PC