Editing Note Velocity Or Duration Data - Akai MPC 3000 Operator's Manual

============ Edit Note Data ============
1.Edit velocity/duration
2.Edit note number assignment
3.Edit note variation data
========================================
Select option:
These options are described in the three sections below.

Editing Note Velocity or Duration Data

To edit the velocity or duration data of a group of notes in one
operation, select 1 from the Edit Note Data menu. The following
screen will appear:
======== Edit Velocity/Duration ========
Seqnc: 1-Seqnc_name
Track: 1-Track_name
Ticks:001.01.00-001.01.00
Notes: 0(C.-2)-127(G.8 )
========================================
<Do it>
The fields and soft keys are:
• The Seqnc field:
This specifies the sequence to be edited.
• The Track field:
This specifies the track to be edited. Only one track can be edited at
a time.
• The Ticks fields:
These two bar.beat.tick fields are used to determine the region
within the track that will be edited. The leftmost field sets the start
of the region and the rightmost field holds a location one tick after
the region to be edited.
• The Notes field:
This field determines which notes will be edited. As shown above, it
appears in one of two ways depending on whether the selected track
is a Drum or MIDI track:
1. If the source track is a MIDI track, two numeric fields—
used to set the lowest and highest notes of the note range
that is selected for editing—appear as above. Each of
these numeric fields is editable via the cursor, and has a
Page 87
Chapter 4: Editing Sequence
Edit:VELOCITY
Do:ADD VALUE
Value:120
(Press keys)