Transposing In Real Time While Playing - Akai MPC 3000 Operator's Manual

Midi production center
Hide thumbs Also See for MPC 3000:
Table of Contents

Advertisement

Chapter 4: Editing Sequence

Transposing in Real Time While Playing

and the second field sets a location one tick after the last tick of the
region to be transposed.
<Transpose Permanent>
• The
Pressing this soft key causes the above-specified transposition to be
made permanent by actually changing each of the note events
within the specified region of the sequence. After this operation, the
Amount
field is reset to 0 and the transpose light goes off.
To transpose a sequence in real time while playing, follow these
steps:
1. Play the sequence.
2. Press the TRANSPOSE key.
3. Locate Middle C on the keyboard. Pressing any key above Middle
C will instantly transpose the sequence up by an amount equal to
the interval between the new key and Middle C. Pressing any key
below Middle C will instantly transpose the sequence down by an
amount equal to the interval between the new key and Middle C.
When you press the transposition key, it will only be used to set
the transposition interval—the note itself will not sound. Be sure
to press the key immediately before the instant that you want
the transposition to occur. To remind you that your sequence is
being transposed, the light above the TRANSPOSE key will go on
if any
Amount
value other than 0 has been selected.
4. To return to the original key signature, press Middle C or set the
Amount
field to 0.
Page 106
soft key:

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents