Akai MPC 3000 Operator's Manual page 258

MPC3000 Software Update Version 3.1 Operator's Manual
• The Volume field:
On S1000 or S3000 hard disks or CD-ROMs, each partition may contain up to
100 volumes, in which the actual files are contained. Volumes act as directo-
ries— files are contained within volumes, and volumes are contained within
partitions. This field displays the active volume and only appears if a SCSI
disk partition, not the floppy, is selected in the Disk field. It is for display
only and cannot be edited. To change the active volume, you must press <Sel
Vol>.
• The <Sel Vol> soft key:
Pressing this soft key presents a screen that allows you to change the active
volume of the S1000/S3000 hard disk or CD-ROM. This field appears only if a
S1000 or S3000 hard disk or CD-ROM is active and one of the disk partitions
is currently selected in the Disk field above.
Other than the above changes, this screen operates as in previous system
software versions.
Page 6