Akai MPC 3000 Operator's Manual page 230

Chapter 11: MIDI Function
Model: MPC3000 (sequencer section)
Function
Basic Default
Channel Channel
Default
Mode Messages
Altered
Note
Number True Voice
Velocity Note ON
Note OFF
After Key's
Touch Ch's
Pitch Bender
Control 0-127
Change
Prog
Change True#
System Exclusive
System :Song Pos
:Song Sel
Common :Tune
System :Clock
Real Time :Commands
Aux :Local ON/OFF
Mes- :All Notes Off
sages :Active Sense
:Reset
Mode 1: OMNI ON, POLY
Mode 3: OMNI OFF, POLY
Note: If the Convert Sustain Pedal To Duration field (accessed by pressing the MIDI key
and selecting option 2) is set to ON, then incoming controller 64 messages (sustain pedal)
will not be recorded into sequences. Instead, any notes that are currently pressed when a
Sustain On message is received are internally held on, even after they are released, until a
Sustain Off message is received. The result is that the individual durations of notes are
lengthened. This is explained further in the "MIDI Receive Channel, Local Mode, Soft Thru,
Note Variation Controller Assign and Sustain Pedal Processing" section of the manual,
earlier in this chapter.
MIDI Implementation Chart
Transmitted Recognized
1-16 1-16
1-16 1-16
3 1
0-127 0-127
0-127 0-127
0-127 0-127
Mode 2: OMNI ON, MONO
Mode 4: OMNI OFF, MONO
Page 218
Version: 3.0
Remarks
See note below
: Yes
: No