Akai MPC 3000 Operator's Manual page 210

Chapter 10: Syncing to Tape and Other Devices
MIDI in
• The
This field is used to select which of the two MIDI inputs,
input 1 or input 2, will be used to receive the MIDI sync
signal.
FSK24
If is selected in the
displayed:
===== Sync In ======
Mode:FSK24
Shift early (ms):20
====================
<SyncIn=ON >
In this case, the field is:
Shift early
• The
This has the same function as the field of the same name
that appears when
Mode field, as described above.
If 1/4 NOTE CLICKS
screen will be displayed:
===== Sync In ======
Mode:1/4 NOTE CLICKS
Shift early (ms):20
Starts at:THIS BAR
====================
<SyncIn=ON >
In this case, the fields are:
• The Shift early
This has the same function as the field of the same name
that appears when
Mode field, as described above.
Starts at
• The
If set to BAR 1
the sequence at bar 1. If set to
received will start the sequence playing from the current
bar position within the sequence or song.
Page 198
field:
Mode
field, the following screen will be
==== Sync Out ====
MIDI sync:OUT A
==================
<GenSMPTE>
field:
MIDI CLOCK is selected in the
is selected in the Mode
==== Sync Out ====
MIDI sync:OUT A
==================
<GenSMPTE>
field:
MIDI CLOCK is selected in the
field:
, the first click received will always start
THIS BAR
field, the following
, the first click