Selecting The Active Program, Assigning Sounds - Akai MPC 3000 Operator's Manual

Selecting the Active Program, Assigning Sounds

A single screen allows the selection of the current program, as well
as the creation of a program's sound assignments. To access this
screen, press the PROGRAM/SOUNDS key. The following menu
screen will appear:
===== Programs =====
1.Sel pgm, asn snds
2.Envel,veloc,tune..
3.Dynamic filter
4.Copy, initialize
====================
Options 1 through 4 relate to creating and editing programs. Press 1
to go to the Select Program, Assign Sounds screen:
============ Select Program ============
Active program: 1-BIG DRUM SET
========== Assign Note:37/A01 ==========
Sound:BIG BAD DRUM
General MIDI name for note:SIDE STICK
========================================
<Play>
A description of screen fields and soft keys follows:
The Select Program section of the screen:
• The Active program
The active program is the program that is currently in use. Only one
program can be active at a time. This field is used to select which of
the 24 programs is currently active. All data displayed below and in
the other program screens apply only to the active program selected
here. Range: 1-24.
• The Program Name field (
This field is located to the right of the
contains the currently assigned 16-character name for the selected
program number. This name is edited in the same way as the
Sequence Name field in the Play/Record screen.
Page 119
Chapter 6: Creating and Editing Programs
===== Sounds =====
5.Sample new sound
6.Edit sound
7.Renam,cpy,delete
8.Audio trigger
==================
Select option:
(ST)
field:
1-BIG DRUM SET BIG DRUM SET BIG DRUM SET BIG DRUM SET BIG DRUM SET
Active program
Mode:DCY SW
in above example):
field. It