Akai MPC 3000 Operator's Manual page 148

its pad assignment, use the All Mix Data (Text) function, accessed
by selecting option 3 from the initial MIXER/EFFECTS key menu.
COMMENT: The data values used for the volume and pan
displays are normally taken from the active program. Be-
cause of this, whenever the active program is changed, the
newly selected program's stereo mix settings will immediately
become active. However, it is also possible to use mix data
from the active sequence so that each newly selected sequence
will have its own custom mix, or to use a single master set of
mix data so that the stereo mix never changes when either the
program or sequence is changed. This choice may be made in
the Mixer Source Select fields, accessed by pressing option 4
from the MIXER/EFFECTS key menu.
• SOFT KEY 1:
Even though no soft key functions are displayed on the screen, there
is one active soft key: pressing SOFT KEY 1 will change the mixer
to a mode in which all pads are edited simultaneously, indicated by
16 cursor triangles across the screen. Thus, you can fade or pan all
pads in a bank at the same time. You can toggle between volume
and pan control with the UP and DOWN cursor keys. To return to
normal operation, press SOFT KEY 1 again.
Page 135
Chapter 7: The MIXER/EFFECTS Key