Akai MPC 3000 Operator's Manual page 144

<Do it>
5. Press the
If 2 is selected from the Copy, Initialize Program menu:
===== Copy 1 Program over Another ======
Copy from program:24-Program_name____
Copy to program:24-Program_name____
========================================
<Do it>
This command copies all data from one program to a different
program number. To perform the copy:
1. Enter the source program number in the
gram
field. The program name is displayed to the right for conve-
nience.
2. Enter the destination program number in the
gram
field. The program name is displayed to the right for conve-
nience.
<Do it>
3. Press the
If 3 is selected from the Copy, Initialize Program menu:
========== Initialize Program ==========
Initialize program:24-Program_name____
========================================
<Do it>
This command initializes a program to default values with no
sounds assigned. When
is initialized.
Page 131
Chapter 6: Creating and Editing Programs
soft key to perform the copy.
Copy from pro-
soft key to perform the copy.
<Do it>
is pressed, the selected program
Copy to pro-