Rewriting The Velocity Of Note Events - Akai MPC 4000 Reference Manual

Main mode
4. Move the cursor to the Time field, and specify the region to which timing
correct will be applied.
5. Perform the following operations as appropriate for the type of track.
For a DRUMS type track
Move the cursor to the Pad field, and press the pad to which you want to apply timing
correct. The corresponding pad number will be displayed in the field, and will be selected
for editing.
For an INST type track
Move the cursor to the Notes field, and on your MIDI keyboard, simultaneously press the
highest and lowest notes of the region that you want to select.
The note number at the left of the field will be the lowest note of the range to which tim-
ing correct will be applied, and the note number at the right will be the highest note.
You can also turn the [JOG] dial to change the settings of the Notes field.
6. Press the [PLAY] key to play back the sequence.
You will be able to audition the sequence with the timing correct settings applied.
Note: While auditioning, timing correct will be applied to the entire sequence, regardless of the settings
of the Time field.
7. Adjust the settings of the TC field or Swing field to modify how timing correct is
applied.
When you are satisfied with your adjustments, press the [STOP] key to stop the sequence.
8. To execute timing correct, press the [F6] key (DO IT).
When the note events have been rewritten, the popup window will close.
Note: You can also execute the Timing Correct operation from the Sequence Edit page or Step Edit page.
You can return to the previous state by pressing the [UNDO SEQ] key immediately after executing
Timing Correct.

Rewriting the velocity of note events

Here's how to increase or decrease the velocity of the note events recorded in a track.
Executing this operation will rewrite the velocity values of the note events.
1. Move the cursor to the Trk field, and turn the [JOG] dial to select the track in
which you want to modify the velocity.
2. Move the cursor to the Velocity field, and press the [WINDOW] key.
The Edit Velocity popup window will appear.
A Edit type field
Selects the way in which velocity values will be altered.
B Value field
Specifies the amount by which the velocity values will be altered.
C Time field
Specifies the region in which the velocity values will be altered.
22
1
2
3
4
5 6