Editing And Automation - Akai DPS24 Operator's Manual

EDIT
Using SHIFT+CURSOR </>, you may zoom in/out on the waveform horizontally:
You can also use SHIFT+CURSOR UP/DOWN to increase (or decrease) vertical (i.e. amplitude) resolution for
the selected track(s).

EDITING AND AUTOMATION

When performing edits that cause audio to move, it is necessary to edit any automation data that exists in that region
accordingly. If automation data is left untouched by an audio edit, the mix will be wrong. For example, when remov-
ing a piece of audio:
IN OUT
Before CUT
After CUT
without automation edit
Without including the automation data in the edit, the fade is now in the wrong place.
45