Akai MPC 3000 Operator's Manual page 101

Chapter 4: Editing Sequence
range of 0 to 127; the equivalent note name (C-2 to G8) is
shown to the right of each field. Alternately, these fields
can be set by pressing two notes on the MIDI input
device's keyboard. The fields will automatically be set to
the lowest and highest keys pressed.
2. If the source track is a Drum track, this field is used to
select specific drum notes, represented by MIDI note
numbers, that are to be edited. This field cannot be
accessed by the cursor—it can only be changed by press-
ing pads or receiving external MIDI notes. When the
screen is first displayed, it contains the word
all notes) and the text
a pad is pressed, the pad's currently assigned note
number appears in the field, followed by the pad number
and currently-assigned sound name. On the right side of
the line is the text
is selected for editing:
Notes:36/A02-SNARE_DRUM
If another pad is then pressed, its note number, pad
number, and assigned sound are displayed instead, and
the text to the right displays
ues until the user has selected all of the pads he or she
intends to edit.
• The Edit field:
This is a choice field with two options:
It is used to select which of these two parameters will be affected.
• The Do field:
This is a choice field with four options:
ADD VALUE
1.
Value field to the velocity or duration of each note that
has been selected for editing.
SUB VALUE
2.
Value field from the velocity or duration of each note
that has been selected for editing.
MULT VAL %
3.
duration of each note that has been selected for editing by
the number in the
change; values of 101 to 200% proportionally increase
each note's velocity or duration value; values of 0 to 99%
proportionally decrease each note's velocity or duration
value.
SET TO VAL
4.
duration of each note that has been selected for editing to
the number in the
Page 88
(Hit pads)
( 1 pad ) indicating that one pad
( 2 pads)
VELOCITY
: This selection adds the number in the
: This selection subtracts the number in the
: This selection multiplies the velocity or
Value field. A value of 100% = no
: This selection changes the velocity or
Value field.
ALL
(edit
to the right. When
( 1 pad )
. This contin-
DURATION
and .