Akai MPC 3000 Operator's Manual page 110

• The Poly Pressure event
>Poly_pressure
There are three fields:
1. The Note Number field (
This is the note to which the pressure message applies.
2. The Note Name field (
This is the note name for the note number selected at the
left. This is for display only and cannot be edited.
3. The Value field (
This is the pressure value for the selected note number (0
to 127).
• The System-Exclusive event
>System_exc Size:
There are three fields:
1. The Size field:
This displays the total number of data bytes. The maxi-
mum size of a system-exclusive event in the MPC3000 is
999 bytes.
2. The Byte field:
The number of the byte whose contents are currently
displayed in the
3. The Val field:
The current value of the byte number displayed in the
Byte
field.
• The Stereo Volume event
>Stereo_volume
This message is exclusive to the MPC3000 and is used to change the
Stereo Mixer Volume setting of a particular sound in mid-sequence.
When the Record Live Changes feature is used (accessed by pressing
MIXER/EFFECTS, then 4), many of these events are recorded into
the active track to simulate a smooth and continuous mixer volume
change. There are two fields:
1. The Pad field:
This field determines which of the 64 pad numbers/mixer
sliders (A01-D16) this message will affect.
2. The Val field:
This field contains the actual mixer slider value (0-100).
Page 97
Chapter 4: Editing Sequence
Note: 60(C.3 ) Val:127
Note: 60 60 60 60 60(C.3 )
Note: 60<C.3 C.3 C.3 ) C.3
C.3
Val:127 127 127 127 127
):
1 Byte:
Val field.
Pad:A01
):
):
1 Val: 0
Val:100