CITO RSP System 2.0 Operating Manual page 87

Table: Printing material thicknesses
The printing material thicknesses indicated in the following tables are meant as guide num-
bers only.
Working with flexible dies/RSP direct fit flexible dies
Only cutting and/or perforating
Only cutting and/or perforating in combination with creasing
Working with RSP rules
Only cutting and/or perforating
Only creasing
Only cutting and/or perforating in combination with creasing
in dry ink in fresh ink
0.50 mm 0.45 mm
0.27 mm 0.23 mm
0.50 mm 0.50 mm
0.40 mm 0.40 mm
0.35 mm 0.26 mm
Operating Manual
87