Bosch Kiox Original Operating Instructions page 113

Maximum saddle height
Source: EN 15194:2017: vertical distance from
the ground to the point where the top of the seat
surface is intersected by the seat-post axis,
measured with the saddle in a horizontal position
and with the seat-post set to the minimum
insertion-depth mark.
Maximum tyre pressure
Source: EN 15194:2017: maximum tyre pressure
recommended by the tyre or rim manufacturer for
a safe and efficient performance. If the rim and
tyre both indicate a maximum tyre pressure, the
maximum inflation pressure is the lower of the two
pressures indicated.
Minimum insertion depth mark
Source: EN 15194:2017: mark indicating the
minimum insertion-depth of handlebar stem into
fork steerer (fork stem) or seat post into frame.
Model year
Source: ZEG: the model year refers to the first
production year that the series-manufactured
pedelec was manufactured in the version in
question and is not always identical with the year
of manufacture. The year of manufacture may be
before the model year in some cases. If no
technical modifications are introduced to the
series, production may continue of pedelecs from
a previous model year.
Mountain bike
Source: EN-ISO 4210-2: bicycle designed for use
off-road on rough terrain, on public roads, and on
public pathways, equipped with a suitably
strengthened frame and other components, and,
typically, with wide-section tyres with coarse tread
patterns and a wide range of transmission gears.
Off-road rough terrain
Source: EN 15194:2017: coarse pebble tracks,
forest trails, and other general off-road tracks
where tree roots and rocks are likely to be
encountered.
Permitted total weight
Source: EN 15194:2017: weight of the fully
assembled pedelec plus the rider and baggage,
as specified by the manufacturer.
MY21P01 - 22_1.0_24.09.2020
Quick-release device, quick release
Source: EN 15194:2017: lever actuated
mechanism that connects, retains or secures a
wheel or any other component.
Racing bicycle
Source: EN-ISO 4210-2: bicycle intended for high-
speed amateur use on public roads having a
steering assembly with multiple grip positions
allowing for an aerodynamic posture, a multi-
speed transmission system, tyre width not greater
than 28 mm and a maximum mass of 12 kg for the
fully assembled bicycle.
Seat post
Source: EN 15194:2017: component that clamps
the saddle (with a bolt or assembly) and connects
it with the frame.
Shut-off speed
Source: EN 15194:2017: speed reached, by the
pedelec, at the moment the current has dropped
to zero or to the no load current value.
Spare part
Source: EN 13306:2018-02, 3.5: item intended to
replace a corresponding item in order to retain or
maintain the original required function of the item.
Suspension fork
Source: EN 15194:2017: front fork incorporating
controlled, axial flexibility to reduce the
transmission of road-shocks to the rider.
Suspension frame
Source: EN 15194:2017: frame incorporating
controlled, vertical flexibility to reduce the
transmission of road-shocks to the rider.
Type number
Source: ZEG: all pedelec models have an eight-
digit type number which is used to specify the
design model year, the type of pedelec and the
version.
Wear
Source: DIN 31051: reduction in useful life (4.3.4),
caused by chemical and/or physical processes.
Glossary
117