Checking And Adjusting The Tyre Pressure - Presta Valve; Checking And Adjusting The Tyre Pressure - Schrader Valve; Brake System - Bosch Kiox Original Operating Instructions

4 Correct the tyre pressure according to
specifications in the Pedelec pass.
5 If the tyre pressure is too high, unfasten the
union nut, let air out and re-tighten the union
nut.
6 Remove the bicycle pump.
7 Screw the valve cap tight.
8 Screw the rim nut gently against the rim with
the tips of your fingers.
7.4.1.4 Checking and adjusting the tyre
pressure – Presta valve
Only applies to pedelecs with this equipment

1 Unscrew and remove the
2 Open the knurled nut
3 Carefully apply the bicycle
insert is not bent.
4 Pump up the tyre slowly and pay attention to
the tyre pressure in the process.
5 Correct the tyre pressure as per the
specifications on the tyre.
6 Remove the bicycle pump.
7 Tighten the knurled nut with your fingers.
8 Screw the valve cap tight.
9 Screw the rim nut gently against the rim with
the tips of your fingers.
MY21P01 - 22_1.0_24.09.2020
It is recommendable to use
a bicycle pump with a
pressure gauge. The
operating instructions for
the bicycle pump must be
adhered to.
valve cap.
around four turns.
pump so that the valve
7.4.1.5 Checking and adjusting the tyre
pressure – Schrader valve
Only applies to pedelecs with this equipment

It is recommendable to use a
bicycle pump with a pressure
gauge. The operating
instructions for the bicycle
pump must be adhered to.
1 Unscrew and remove the
valve cap.
1
2 Attach the bicycle pump.
3 Pump up the tyre slowly
and pay attention to the tyre pressure in the
process.
 The tyre pressure has been adjusted as per the
specifications.
4 Remove the bicycle pump.
5 Screw the valve cap tight.
6 Screw the rim nut (1) gently against the rim
with the tips of your fingers.
7.4.2

Brake system

CAUTION
!
Crash caused by brake failure
Worn brake discs and brake linings, as well as a
lack of hydraulic fluid in the brake cable, reduce
the braking power. This may cause a crash with
injuries.
 Check the brake disc, brake linings and
hydraulic brake system on a regular basis.
Contact your specialist dealer if any of these
components have become worn.
The maintenance interval for the brake depends
on the weather conditions and how frequent the
bicycle is used. If the pedelec is used under
extreme conditions such as rain, dirt or high
mileage, maintenance must be performed more
frequently.
Cleaning and servicing
87