Battery Error - Bosch Kiox Original Operating Instructions

9.1.4

Battery error

Symptom Cause
The battery discharges The battery may be at the end of its
very quickly. useful life.
Is the charger mains plug firmly
connected to the socket?
Is the charger plug firmly connected to
battery?
The battery cannot be
recharged.
Is the adapter firmly connected to the
charger plug or the battery's charging
port?
Is the connection terminal for the
charger, charger adapter or battery
dirty?
The battery does not start
The battery may be at the end of its
charging when the
useful life.
charger is connected.
The temperature of the battery or the
The battery and charger
charger may have exceeded the
become hot.
operating temperature range.
If the charger is used continuously to
The charger is hot.
charge batteries, it may become hot.
The LED on the charger will go out
when the battery is fully charged.
Is the charger plug firmly connected to
battery?
The LED on the charger
does not light up.
Is the battery fully charged?
The battery cannot be
removed.
The battery cannot be
inserted.
Fluid is leaking from the
battery.
Table 39: Error solution for battery
MY21P01 - 22_1.0_24.09.2020
Troubleshooting, fault clearance and repair
Remedy

Replace old battery with new one.
1 Disconnect the charger mains plug.
2 Insert the mains plug.
3 Start charging.
4 If the battery still won't recharge, disconnect the charger plug.
5 Insert charger plug.
6 Start charging.
7 If you are still unable to recharge the battery, connect the
adapter with the charger plug or the battery's charger
connection.
8 Start charging.
9 If you are still unable to recharge the battery, wipe the
connection terminals with a dry cloth to clean them.
10 Start charging.
11 If the battery still won't recharge, contact your specialist
dealer.

Replace old battery with new one.
1 Interrupt charging process.
2 Wait a moment.
3 Start charging.
4 If the battery is too hot to touch, there might be a problem with
the battery. Contact your specialist dealer.
1 Wait a moment.
2 Start charging.
This is not a malfunction.
1 Check the connection for any contaminants.
2 Insert charger plug.
3 Contact your specialist dealer if there is no change.
4 Disconnect the charger mains plug if there is no change.
5 Insert the mains plug.
6 Start charging.
7 Contact your specialist dealer if the LED on the charger still
doesn't light up.

Contact your specialist dealer.

Contact your specialist dealer.

Observe all the warnings in Section 2 Safety.
97