1Registration With Ebike Connect; 2Resetting Daily Mileage Or Average; Values Manually; Values Automatically - Bosch Kiox Original Operating Instructions

Settings menu structure
Level 1 Ebene2
Registration
My eBike
→
<Reset>
→
<Auto reset [Current value]>
→
<Range>
→<eShift>
→
<Wheel circum>
→
<Service:
→
<Components>
Bluetooth®
My Profi
Sys settings
→
<Brightness>
→
<Clock>
→
<Date [DD.Mon.YYYY]
→ <Time zone>
→ <24-hour>
→
<Light backlight>
→ <Language>
→
<Factory settings>
Information
→
<Introduction to Kiox>
→
<Registration>◦
→
<FAQs>
→
<Introduction to Kiox>
→
<Certificates>
→
<Licence info>◦
→
<Contact>
 Select the desired setting using the Plus and
Minus buttons.
 Press the Select button to confirm.
 Use the Back button to return to the previous
menu.
 Follow the instructions on the on-board
computer. You will find a detailed description of
the individual parameters in the online
operating instructions at
www.Bosch-eBike.com/en/Kiox-manual.
6.13.14.1 Registration with eBike Connect
1 Open <Registration> menu item.
2 Follow the instructions on the on-board
computer.
MY21P01 - 22_1.0_24.09.2020
[DD. Mon. YYYY] or after [xxxxx] [km]>
6.13.14.2 Resetting daily mileage or average

values manually

1 Open <My eBike> menu item.
2 Open <Reset> sub-menu item.
3 Follow the instructions on the on-board
computer.
 Daily mileage or average values are reset to
zero.
6.13.14.3 Resetting daily mileage or average

values automatically

1 Open <My eBike> menu item.
2 Open <Auto reset [Current value]>.
3 Select <Off>, <Daily> or <After 4 hours>.
 Daily mileage or average values are reset to
zero after the selected point in time.
6.13.14.4 Resetting the range
1 Open <My eBike> menu item.
2 Open <Range> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The range is reset to the default setting.
6.13.14.5 Configuring eShift
Only applies to pedelecs with this equipment
1 Open <My eBike> menu item.
2 Open < eShift> sub-menu item.
3 Follow the instructions on the on-board
computer.
 eShift is configured.
6.13.14.6 Switching on Bluetooth®
1 Open < Bluetooth®> menu item.
2 Follow the instructions on the on-board
computer.
 Bluetooth® is switched on.
Operation
74