Checking The Quick Release; Maintaining The Stem; Adjusting The Gear Shift; Cable-Operated Gear Shift, Single-Cable - Bosch Kiox Original Operating Instructions

8.2.1

Checking the quick release

 Check the position and clamping force of the
quick release lever. The quick release lever
must be flush with the lower housing. You must
be able to see a slight impression on the palm
of your hand when you close the quick release
lever.
Figure 86: Adjusting the quick release clamping force
 Use a 4 mm hexagon socket spanner to adjust
the clamping lever clamping force if required.
Check the quick release lever position and
clamping force.
Figure 87: Adjusting the quick release clamping force
MY21P01 - 22_1.0_24.09.2020
8.3

Maintaining the stem

Incorrectly fastened screws may come loose due
to impact. The stem may no longer be firmly fixed
in its position as a result. This will cause a crash
with injuries.
 Check the handlebars and the stem's quick
release system are firmly in position after the
first two hours of riding.
8.4

Adjusting the gear shift

If you cannot select the gears effortlessly, you will
need to adjust the setting for the shift cable
tension.
 Carefully pull the adjusting sleeve away from
the shifter housing, turning it as you do so.
 Check the gear shift function after each
adjustment.
8.4.1 Cable-operated gear shift, single-
cable
Only applies to pedelecs with this equipment
 For a smooth gear shift, adjust the adjusting
sleeves on the shifter housing.
1
Figure 88: Adjusting sleeve (1) for the single-cable, cable-
operated gear shift with shifter housing (2), example
Maintenance
2
93