Additional Journey Information For Eshift Shimano Di2 And Rohloff - Bosch Kiox Original Operating Instructions

– Registration
Registration with eBike Connect. This menu item is
only displayed if the rider has not registered with eBike
Connect yet.
– Bluetooth®
→
Switching the Bluetooth® function on and off
→
Add new device or remove a device no longer
needed
→
Display connected devices
– My profile
The active user's details.
– My eBike
Menu with seven settings for the pedelec.
→
<Reset>
Displays the point in time of the last reset. Counters
such as daily mileage or average values can be re-set
manually.
→
<Auto reset [Current value]>
Counters such as daily mileage or average values can
be re-set automatically. You can choose between
<Off>, <Daily> or <After 4 hours>
→
<Range>
This is where the value of the range can be reset.
→ <eShift>
If the pedelec is fitted with eShift, this is where the
eShift system is configured. The pedalling frequency
and the start gear can be set.
→
<Wheel circum>
Adjust the wheel circumference value or reset to the
standard setting. The manufacturer wheel
circumference can be changed by ± 5%.
→
<Service: [DD. Mon. YYYY] or after [xxxxx]
[km]>
The manufacturer or specialist dealer can enter a
mileage and/or period for the servicing date. Is only
displayed if information has been entered.
→
<Components>
Display for the components concerned showing the
serial number, hardware version, software version and
other specifications relevant for components.
– Sys settings
On-board computer settings
→
<Brightness>
→
<Clock>
Setting the clock
→
<Date [DD.Mon.YYYY]>
Setting the date
→ <Time zone>
Selecting time zone
→ <24 hours>
Display time in either 12-hour or 24-hour format
MY21P01 - 22_1.0_24.09.2020
→
<Light backlight>
Select a black or white on-board computer design
→ <Imperial>
Select unit for speed and distance
→ <Language>
Setting the language
→
<Factory settings>
Resetting to factory settings. All user data will be lost
during reset.
– Information
Information on the Kiox on-board computer.
→
<Introduction to Kiox>
Explanation of the key functions and screens
→
<Registration>
→
<FAQs>
Information on FAQs (frequently asked questions)
→
<Introduction to Kiox>
→
<Certificates>
Certifications
→
<Licence info>◦
Information on licences
→
<Contact>
Contact details
You will find a detailed description of the
individual parameters in the online operating
instructions at
www.Bosch-eBike.com/en/Kiox-manual.
3.5.2.6 Additional journey information for
eShift Shimano DI2 and Rohloff
Only applies to pedelecs with this equipment
The gear or shift mode (Manual M/Automatic A) is
always displayed on the start screen. If you are
currently viewing another screen, the gear is
displayed briefly when the gear is changed. Since
the drive unit detects the gear shift and
consequently reduces motor assistance briefly, it
is also possible to switch gears under load or on
hills. If the pedelec is brought to a halt from a
speed greater than 10 km/h, the system can
automatically switch back to a pre-set start gear.
Overview
30