About Ranges And Accuracies Of Sensor Measurements; Marks And Indicators; Before Mountain Climbing; How To Charge - Seiko S810 Instructions Manual

About ranges and accuracies of sensor measurements
1
This watch is equipped with sensors for atmospheric pressure, direction, and tem-
perature to measure the altitude, atmospheric pressure, temperature, and direction.
The measurement ranges and accuracies are as follows.
Altimeter: Display unit 1 m/5 ft
Measurement range Between -699 and 9,164 m/-2,290 ft and 30,065 ft
Accuracy Altitude lower than 6,000 m: ± (diff erence in altitude x 3% + 30 m)
Altitude higher than 6,000 m: ± (diff erence in altitude x 3% + 45 m)
Temperature range to ensure accuracy Between -5° C and 40° C
Barometer: Display unit 1 hPa/0.01 inHg
Display range Between 300 and 1,100 hPa/8.85 and 32.48 inHg
Accuracy ± 3 hPa
Temperature range to ensure accuracy Between - 5° C and 40° C
Compass: Directional angle resolution 1°
Measurement range Between 0 and 359°
Accuracy ± 10°
Temperature range to ensure accuracy Between 10° C and 40° C
Thermometer: Display unit 1° C /1° F
Measurement range Between -10° C and 60° C /-14° F and 140° F
Accuracy ± 3° C
Temperature range to ensure accuracy Between -5° C and 40° C
98
Before mountain climbing
Please confi rm the following before use during mountain climbing.
2
■ The watch is fully charged.
→
"How to charge" Refer to page 101.
■ The time and calendar are correctly set.
→
"How to use the time/calendar mode" Refer to page 113.
【CAUTION】 T his watch is not a special measuring instrument, therefore, use
the measuring function as a guide.
When using the direction indicator for full-fl edged mountaineering,
make sure to bring a backup compass.
【CAUTION】 F or correct measurement, correct the altitude and direction before
measuring. → "How to correct altitude" Page 126, "How to correct
magnetic declination" Page 141
100
Marks and indicators
Battery life indicator ： T he approximate remaining amount of battery power is
shown.
Power Save mark ： The mark indicates that the watch is in power save mode.
Sleep mark ： The mark indicates that the watch is in sleep mode.
Alarm mark ： The mark appears when alarm is engaged.
Hourly time signal mark ： T he mark appears when the confi rmation sound for but-
ton operations is turned on. When the confi rmation sound
for button operations is turned on, the hourly time signal
sounds every hour on the hour.
REC mark ： T he mark indicates that mountaineering recording is in
progress.
Bluetooth mark ： The mark indicates that a Bluetooth connection is made.
In-fl ight mode mark ： The mark indicates that the in-fl ight mode is set.
How to charge
（1）How to charge
Expose the solar panel to light.
Solar Panel
To enjoy optimal per formance of the
watch, make sure that the watch is kept
suffi ciently charged at all times.
※ W hen charging the watch, make sure that the watch temperature is not heated to a high tem-
perature. The operational temperature range is between -10ºC and +60ºC.
※ W hen fi rst using the watch or starting to use the watch after it has stopped because of the en-
ergy depletion, suffi ciently charge the watch referring to the table on the next page.
Under the following situations, the energy of the
watch is likely to be depleted, resulting in stoppage
of the watch.
・The watch is concealed under a sleeve.
・ T he watch is used or stored under conditions
where it cannot be exposed to light for a long time.
1
99
2
101