Names Of The Buttons And Switching Of Display; What You Can Do With This Technology - Seiko S810 Instructions Manual

1
■ Solar charging function
... T he solar panel on the dial converts light into electrical energy to power the
watch. Once fully charged, the watch runs for approximately fi ve months.
I n addition, the power save and sleep functions are activated to reduce en-
ergy consumption.
※ K eep the watch suffi ciently charged by regularly putting it or storing it in a place with
enough light.
■ Battery life indicator
... T he battery life indicator shows the approximate remaining amount of bat-
tery power to let you know when recharging is required.
94
What you can do with this technology
1
With each press of Button Ⓐ or Button Ⓒ
Sensor function (Button Ⓒ) Except for the Alarm mode, the mode is switched to the
〈Time/calendar mode〉 〈Stopwatch mode〉
Ⓒ Ⓒ
Sensor function (Button Ⓐ) Except for the Compass mode, the mode is switched to
〈Altimeter mode〉〈Barometer/thermometer mode〉〈Compass mode〉
Ⓐ Ⓐ
96
, the mode changes in the following order.
time/calendar mode when you press and hold Button Ⓒ.
〈Alarm mode〉
Ⓒ
Ⓒ
the altimeter mode when you press and hold Button Ⓐ.
Ⓐ
Ⓐ
Names of the buttons and switching of display
・ Names of the buttons are assigned as Button Ⓐ to Button Ⓕ clockwise from the left bottom.
・Button Ⓐ switches sensor function and Button Ⓒ switches watch function.
・ The primary function of the button is described next to each button.
・ G uidance marks ( ▲ ) light up for frequently used buttons in each mode, therefore, re-
fer to them for operation.
External description:Explanation for use mainly in watch function
Internal description:
Explanation for use mainly in sensor functio
Button Ⓒ
WATCH
MODE/
SELECT
Button Ⓑ
ADJUST
Button Ⓐ
SENSOR
MODE
※ Each notation and design may diff er according to the model.
First indicator
appearing
on the top row
Watch function
Time/calendar mode TIME Setting and display of time, date and day of the week, pre-
installed calendar from 2016 to 2065, contrast adjust-
ment, Setting of lighting time,power save setting, hourly
time signal setting, alarm sound preview,Setting of in-fl ight
mode
Stopwatch mode Chrono Stopwatch measurement (1/100-second increments), Maxi-
mum measuring time: 9 hours 59 minutes 59 seconds and 99
centiseconds
Alarm mode ALARM Daily alarm (3 channels)
Sensor function
Altimeter mode ALTI Display of current altitude and climbing speed, correction of
altitude, recording of mountaineering data,
Barometer/ BARO Display of current atmospheric pressure and temperature,
thermometer mode Graphic display of atmospheric pressure tendency in the last
20 hours
Compass mode COMP Measurement of direction to which the twelve o clock
position of the watch is directed, display of the true north
direction, and correction of magnetic declination
Button Ⓓ
【CAUTION】
LIGHT/ The operation buttons of this
product are provided on the side.
Bluetooth
When this product is fi tted and,
at the same time, a mountaineer-
Button Ⓔ
ing pole strap is wrapped around
+SET
your wrist, the button may be
pressed by mistake. When us-
ing this product with something
Button Ⓕ
wrapped around your wrist, be
careful so as to prevent it from
START/STOP
hitting the operation button.
REC/MSR/-SET
Ref.
Functions
pages
P.112
P.119
P.121
P.124
P.135
P.138
1
95
1
97